TVPC Operations
Viewing the TVPC
The TVPC function is available only when the main frame is in VGA/DVI mode and the aspect ratio is in 16:9 and
the vertical frequency is 60 Hz.
1 | Press Menu to display the menu main page. |
2 | Press CH5/6 repeatedly to select TVPC item. |
3 | Press Enter to access the submenu. |
| The TVPC item will be highlighted automatically. |
4 | Press Enter to select On or Off. |
Note:
4You may quickly open or close TVPC frame by using the TVPC button directly. 4Audio is from the main picture only.
MAIN MENU
Picture | TVPC |
|
Sound | Source |
|
H Position |
| |
CH |
| |
V Position |
| |
System | Size |
|
OSD | PBP |
|
|
| |
TVPC | On |
|
Setup |
| |
|
| |
|
|
|
Main Frame |
TVPC Frame
Selecting the Signal Source for the TVPC Frame
1 Press Menu to display the menu main page.
2 Press CH5/6 repeatedly to select TVPC item.
3 Press Enter to access the submenu.
4 Press CH5/6 repeatedly to select Source item.
5 Press Enter repeatedly to select signal source for the TVPC frame.
You may select RF, Video1, Video2, SVideo or YPbPr for the TVPC Frame.
Note:
You may quickly select signal source for the TVPC frame by using the P.S. button.
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
TVPC
Source
HPosition V Position
Size
PBP
RF
Changing Channels for the TVPC Frame
When the TVPC frame is in TV mode, press the up or down button to change channels.
When you press the up or down, the unit changes channels in sequence. You will see all the channels that the unit has memorized.
You will not see channels that were erased.
30