Setting System (continued)
Setting System In VGA Mode
Changing the Position of Image
The unit allows you to adjust the position of the screen if it is not
1 Press Menu to display the menu main page.
2 Press CH5/6 repeatedly to select System item.
3 Press Enter to access the submenu.
4 Press CH5/6to select H position or V position item.
5 Press VOL+/- to adjust the value of the item until the screen is
Adjusting Clock and Phase
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
H Position
V Position
Clock
Phase
Auto Adjust
Aspect Ratio
Resolution
Default
40
1
2
3
4
5
Press Menu to display the menu main page.
Press CH5/6 repeatedly to select System item.
Press Enter to access the submenu.
Press CH5/6to select Clock or Phase item.
Press VOL+/- to adjust the value of the item until the screen is
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
HPosition V Position
Clock
Phase
Auto Adjust
Aspect Ratio
Resolution
Default
40
Adjust the clock frequency of the set's internal clock signal. If shimmering or
You may find that images blur, depending on the clock phase of your PC's Processor. If you experience blurring , you can obtain a clearer image by adjusting the phase setting.
Adjusting the Picture Automatically
1 | Press Menu to display the menu main page. |
2 | Press CH5/6 repeatedly to select System item. |
3 | Press Enter to access the submenu. |
4 | Press CH5/6repeatedly to select Auto Adjust item. |
5 | Press Enter to confirm. |
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
HPosition V Position
Clock
Phase
Auto Adjust
Aspect Ratio
Resolution
Default
You may quickly adjust the picture by using the Auto button directly. The unit automatically adjusts phase, clock or position, etc.
The Auto Adjust function only works when the picture is displayed in 16:9 with full screen.
24
