Audiovox GMRSWP1 owner manual Using Your GMRS-WP1

USING YOUR GMRS-WP1

Turning the Transceiver On and Off ( )

Pressing the Power button (10) for 2 seconds will activate the unit and the self-test display momentarily appears followed by the frequency standby display. The headphones will sound a short melody to confirm the transceiver’s activation and the LCD backlight will come on for about 2 seconds. To turn the unit off, simply press and hold the power button for 2 seconds then release it; a short tone will be heard as the unit powers off.

Volume Level

Audio reception volume is controlled by the Up (13) and the Down (12) channel/ volume buttons. Momentarily pressing either button will increase or decrease the volume level, with each step accompanied by a beep tone whose volume increases or decreases accordingly. The display will indicate U1 (lowest setting) to U7 (highest setting).

Call Button (14)

When the call button is pressed, the GMRS-WP1 will transmit a 3-second ringing sound to other transceiver’s tuned to the same channel. This feature can be used to signal other parties that voice communication is desired. The LCD backlight comes on for about 3 seconds, indicating the call transmission has been initiated.

Low Battery Alert

When the battery level becomes low, the LCD channel display will flash at a 1-second rate, indicating that the batteries should be changed.

Monitor/FM (MON/FM) Button (9)

You can monitor channel activity by momentarily pressing the Monitor (MON) button (9). If pressed for more than 2 seconds, the FM function is accessed, whereby Fr appears momentarily on the display. You can now use the CH button (15) to search (SE) the FM band for a desired station.

-9-

128-6739

9 of 16