Audiovox LCM500NP Tools and Materials Required, Utility knife or box cutter with sharp blade

Tools and Materials Required:

•Utility knife or box cutter with sharp blade

•Sharpie™ marker or similar

•Tie Wraps

Remove the headrest from the vehicle for easiest installation.

Lay headrest on a flat surface

Center trim collar on headrest as shown.

NOTE: Depending on the angle of the headrest the trim ring and housing may be mounted upside down.

Using a Sharpie™ marker or similar marking pen, mark headrest material along the interior of the trim collar.

Remove the trim collar and mark an “X” from corner to corner as shown

-3-