Do not use these cleaning agents, Troubleshooting

Do not use these cleaning agents

▯Caustic or corrosive cleaners

▯Don't allow acidic cleaners (e.g. vinegar, citric acid, etc.) to get on the frame or panel

▯Cleaners containing chlorine or large proportions of alcohol

▯Baking oven spray

▯Hard, scratchy dish-washing sponges, brushes or scourers

▯Thoroughly wash out new sponge cloths before using them.

You can often easily eliminate problems that may occur on your own. Before calling customer service, take into account the following information.

Malfunction	Possible cause	Solution

Burner doesn't ignite when	No power supply.	Turn control knob to 0. Check in the fuse box
turned on; indicator lights are off.		whether the fuse has opened.

Burner doesn't ignite when turned on; indicator light of activated burner blinks.

Burner or gas supply malfunction. Turn control knob to 0.

▯Burner parts correctly in place?

▯Gas stop tap open?

▯Burner dry and clean?

▯Air pocket in pipeline after first connection or cylinder change (with liquefied gas)?

▯Gas cylinder empty (with liquefied gas)?

	Burner turns off during operation, Burner or gas supply malfunction.	Turn all control knobs to 0. Wait until the appliance
	indicator lights go out and only	has cooled down!
	the indicator of the burner	With this burner, check:
	affected continues blinking for a	With this burner, check:
	affected continues blinking for a	▯ Burner parts correctly in place?
	few seconds.	▯ Burner parts correctly in place?
	few seconds.	▯ Electrode dirty (food remains) or damp?
		▯ Electrode dirty (food remains) or damp?
		▯ Burner dirtied with spilled food?
		▯ Strong draft of air (e.g. open window directly
		behind the gas stovetop)?
		▯ Gas cylinder empty (with liquefied gas)?

Burners turn off while in	Power failure
operation, indicator lights go out.

Turn all control knobs to 0. Check power supply. There is no automatic re-ignition after a power failure.

Burners turn off while in	Overheating protection	Turn all control knobs to 0. Wait until indicator lights
operation; all indicator lights		stop blinking.
blink.

It smells like gas in the kitchen.	Potential leak at gas cylinder
	connection.

Check gas cylinder connection for leaks.