IMPORTANT NOTES
AInstallation may only be carried out by trained specialists!
AObserve all quality standards of the automobile industry!
AFire hazard! When drilling pay attention to the location of cable harnesses, tank and fuel pipes!
ANever drill into car parts which are load bearing or are important for safety reasons!
When installing components in the interior of the car remember the following:
AThe driver’s field of vision must not be obstructed!
AIncreased risk of injury in accidents! Do not mount components in an area where the airbag will inflate or where head or knees could impact in the event of an accident!
AInstallation may only be made in vehicles with 12 V board voltage and negative pole on car body. Installation in unsuitable vehicles could result in malfunction, damage or fire!
System components
At least the following components are required for installation.
–Navigation computer with universal mounting frame and 2 release clips
–Mounting brackets and installation material
–GPS antenna with metal plate and cable
–Power supply cable
–Signal cable
–IR remote control
–Monitor with monitor cable
–Map DVD/CD and Operating Software CD
Take safety precautions
ABefore starting work disconnect the negative car battery terminal! When doing so make sure to observe manufacturer’s safety instructions (alarm system, airbag, immobilizer, radio coding, etc.)!
Installing metal sleeve, ill 1 - 2
The computer can be mounted in a DIN radio opening of the vehicle with the supplied metal sleeve.
Please note before mounting, ill. 3:
–To ensure access to the DVD/CD opening a free space of at least 130 mm has to be in front of the navigation computer.
–For sufficient air circulation a free space of at least 50 mm has to be behind the navigation computer.
–A stable connection to the car body is necessary for the computer to function correctly!
English
2
