Audiovox NPD 5400 Securing the computer using the mounting brackets, Installing GPS antenna, ill. 6

Thenavigation computer has to be installed in horizontal position. A deviation of

–10to + 30 degrees can be adjusted within the diagnosis menu (see “Initial start-up”).

Greaterdeviations can cause malfunctions.

Insertmetal sleeve into the DIN opening and press appropriate tags outwards with a

screwdriver.Take care not to damage hidden parts in the dashboard.

Securing the computer using the mounting brackets

Ifinstallation of the navigation computer in a DIN slot is impossible or undesirable, it

canbe installed in alternative installation locations using the supplied mounting

brackets(e.g., in the glove box, in the luggage compartment or under the seats).

Forthis purpose, both side-mounted catch springs must be removed from the

navigationcomputer. The two Torx screws are required later for securing the

mountingbracket.

1. Position the brackets with the punched out tab at the right (or left) rear edge of the

computer housing. It must be ensured that the tab fully engages with the sheet

metal of the computer housing.

2. Swing the bracket forwards, applying pressure to the rear edge of the bracket so that

it is flush with the computer housing.

3. Fasten the brackets to the computer housing using the existing Torx screws.

Thecomputer can then be secured in the desired installation location using the screws

supplied.

Ifsuspended installation is required for the computer (e.g., under the rear shelf), the

mountingbrackets can be attached to the computer in the reversed position.

Installing GPS antenna, ill. 6

TheGPS antenna can be mounted in the vehicle interior, for example on the

dashboardor on the hatshelf. The antenna must have clear “view” of the sky.

–Clean the mounting surface and attach the antenna with the double-sided adhesive

tape.

–In vehicles with metallic window tinting the GPS antenna should be mounted

outside on the vehicle body, for example on the roof or in the plastic bumper.

Notes:To ensure perfect function please keep a distance of at least 10 cm to metal

partslike window frame. Mounting temperature should be at least 60 degrees

Fahrenheitto ensure the full adhesive effect of the tape.