TA(Traffic Announcement) / TP (Traffic Program)
TP mode will automatically switch between “ON” and “OFF” depending upon the broadcast. In order to access the TA mode, press the AF button on the remote control for 2 seconds and the TA mode will switch between “ON” and “OFF”.
When the TA mode is “ON” and a traffic announcement is received the following may occur:
•The unit will switch out of DVD/TV/AV1/AV2 modes temporarily to radio mode.
•The volume level will be raised to the threshold point. If the volume level was greater than the threshold point, the volume will decrease.
•When the TA mode is “ON”, the OSD will display “TA ON”
•When a TP station is received, the OSD will display ”TP ON”.
PTY (Program Type)
To access the Program Type feature, press the PTY button the remote control and the OSD will display “PTY ON” or “PTY OFF”. When in the “PTY ON” mode, the different program types can be selected by using the track up and down buttons (I<<, >>I)
RDS (Radio Data System)
1. | Press SYSTEM MENU button and the monitor will display the figure show below. | |
2. | Use the | keys and place the cursor (Yellow Bar) on RDS and press ENTER key. |
3. | Use the | keys to turn the RDS function ON or OFF as shown in the figure below. |
When the RDS function is set to ON the OSD will be similar to that as shown in the figure below.
4. Press P.S/BSM button to store the RDS stations.
NOTE: Only six RDS stations can be stored at one time per band.
40
