
Audio
Within the Audio menu, the following features can be adjusted: Dolby Digital, DTS, MP3/WMA, and CD/VCD. Use the directional arrows and to choose the desired selection. Use the directional arrows and to between digital and analog out. Use the ENTER button to adjust the settings. The Analog output can be set for
More Audio Settings
Within the More Audio Menu, the following features can be adjusted: Speaker Setting, Speaker Level, Speaker Delay, Dynamic Range Compression Decompression, Prologic and Pink Noise. Use the directional arrows and to choose the desired selection. Use the directional arrows
and to adjust the settings.
Speaker Setting
Press the ENTER button to cycle the Speaker Setting between two modes: Center and Subwoofer. To select a feature, press the direction button and "Yes" and "No" will appear on the screen. Use the directional arrows and to select either yes or no.
•"Yes": The audio output of the Center and Subwoofer speakers will be separated. Based on the 5.1 CH decoder. A separate Center or Subwoofer speaker is necessary.
•"No": The audio output of the Center and Subwoofer speaker will be sent to Front Rear speakers. This feature should be used when the system does not have a separate Center or Subwoofer speaker.
43