While in the Category List menu, pressing the DISP button changes Stream List to Artist List. The available content listing now displays information by the Artist
Name. Category Artist Name Display
Category Song Title Display
The DISP button is also used during category tuning. Consecutively pressing the DISP button while tuning by category will display the Stream Name, Artist Name or Song Title within the selected category.
While the preceding screens are displayed, rotating the Encoder knob allows navigation through the list. When the desired selection is highlighted, press the Encoder knob and your selection will be played.
Direct Tuning
Streams can also be directly accessed by pressing the Encoder knob and using the 0-9 number keys to numeri- cally enter the desired stream. Once the desired stream number has been entered, press the Encoder knob again to play.
Setting/Using Stream Preset Buttons
The unit contains 10 preset buttons. There are three banks of preset memory locations offering a total of 30 presets. These banks are designated A, B and C and can be se- lected using the BAND button. The display in the lower right hand side changes to show the corresponding Pre- set bank. Each bank will store 10 user-preferred streams. Select the desired stream you wish to save into memory by using the Encoder knob, the direct tuning method or the category tuning method. With the desired stream playing, press and hold any of the numbered keypad buttons (0-9); the corresponding preset number will flash. A confirma- tion tone is heard, confirming that the preset has been stored. Continue this procedure for storing all desired streams. To retrieve a preset stream, momentarily press and release the number button corresponding to the de- sired stream.
-10-
128-6901
10 of 28
