TELEPHONE OPERATION
Last Number Redial
In the on hook mode, press the REDIAL (INT/PAUSE) (4) button to show the last dialing number on display.
The user can select up to last ten external numbers by pressing the 5/6(6) buttons.
These are stored in chronological order, with the most recent being displayed first. Then press the YES (3) button to dial the selected number.
If there are no numbers in the list, then the redial button will show “NO ENTRIES”.
As with other lists and menus, the redial list will wrap around.
TRANSFERRING AN EXTERNAL CALL
It is not possible to transfer internal calls from one internal extension to another - the users must redial. The facility to transfer an external call is described here.
Transferring to another registered handset
If the user needs to transfer an outgoing or incoming call to another handset registered to the same base station, this is done by pressing the INT (REDIAL/PAUSE) (4) key for 1 second, followed by the internal telephone number. The call transfer is completed by pressing the NO (5) key to return to standby state or aborted by pressing the INT (REDIAL/PAUSE) (4) key for 1 second again. The call duration timer is not transferred between internal extensions.
Transferring using the Flash Key
If the base station is connected to a PABX extension, then the OFF HOOK/YES (3) key may be pressed during a call to send a Flash to the PABX. Call transfer to another PABX extension is then handled according to the procedure specified by the PABX.
E - 13
9038_2_ib_e.p65 | 13 | 10/31/03, 12:20 PM |
