15

8.If the antenna is mounted outside, route the cable from the antenna position to the interior of the home, working the cable through the basement, under a window sill, etc.; make adjustments and take up slack whenever necessary.

9.Plug the antenna cable into the ANT IN connector on the back of the cradle.

10.Plug the DC Adapter jack into the DC IN receptacle on the cradle.

11.Plug the other end of the AC/DC wall adapter into 110-volt wall receptacle; then press the Xpress XM Receiver Power button ( ) to energize the unit. You are now ready to enjoy XM programming within your home.

Installation / Wiring Precautions

Page 15
Image 15
Audiovox XMH-10A manual Installation / Wiring Precautions