13
Step 13 Model 6804
Side Burner Valve Assembly
NOTE: Side Burner Valve is already attached to the regulator hose.
A. Install the Side Burner Valve from underneath the LEFT Side Table. First insert the valve stem out through the hole in the bezel and fascia on the front of the side table. Next, flex the tube of the burner down and insert the nozzle into the opening in the burner tube.
B. Install two 5/32” x .31” Bolts through the Control Knob Bezel and front of Side Table and into the threaded Valve bracket holes. Install the top bolt first by twisting the valve/bracket to align only the top holes. Do not tighten completely. Next, twist the valve/bracket to align the bottom holes and install the second bolt. Tighten both.
A
5/32 x .31” Bolt |
|
2 pc | Top First |
| |
Valve | B |
| |
| Bottom Second |
Step 14 Model 6805
Side Burner Valve Connection
A. Install the Side Burner Valve from underneath the LEFT Side Table. First
insert the valve stem out through the hole in the bezel and fascia on the front of the side table.
Next, install two 5/32” x .31” Bolts through the Control Knob Bezel and front of Side Table and into the threaded Valve bracket holes.
B. Remove nut from the unattached end of the corrugated hose that is connected to the Side Burner valve. Place the end of the hose through the hole in the Side Burner bracket. Replace the nut on the other side of the bracket.
C. Attach Thermocouple fitting to valve. Carefully align and insert end of sensor, extending from brass nut on copper tubing, into threaded opening in side burner valve as shown below. Gently flex copper tubing to insure brass nut is not
Underside view of Side Table/Side Burner Thermocouple wire not shown for clarity
AC
B
Brass Thremocouple Nut
DO NOT OVER TIGHTEN
Side Burner Valve
