|
|
|
| |
STEP 9 - Mount Grill bowl to Legs | ||||
| TOOLS: | |||
|
|
|
| |
|
|
|
| |
|
|
|
| |
(ITEM 13) |
|
|
|
|
|
|
| (ITEM 27) |
| (ITEM 26) |
| (ITEM 9) | |
BOLT, M6 X 45 |
| WASHER 6MM |
| BOWL BOLT SPACER |
| NUT, 6M |
4 pcs |
| 4 pcs |
| 4 pcs |
| 4 pcs |
•Carefully position grill Bowl over holes in tops of Legs with the Burner manifold tubes facing forward opposite the Rear Support Bar at the back of cart. (The Cylinder Support Bracket should be on the left side.)
•Insert a M6 x 45mm Bolt through a 6mm Washer. Carefully align a Bowl Bolt Spacer between Bowl and Leg underneath one of the four holes in each corner of the bowl. Insert a M6 x 45mm Bolt through Bowl, Bowl Bolt Spacer and Leg and secure with a 6M Nut. (See Photos 2 & 3) Repeat with remaining Bolts.
*Caution* - DO NOT Overtighten mounting screws. You could crack the porcelain Bowl.
6M x 45 Bolt
Bowl Bolt
Spacer
Photo 1
6M Nut
Photo 2
Photo 3
17
