Auto Page ACD-94 Operating Instructions, br VACUUM FLOURESCENT DISPLAY VFD, bt MODE SELECTOR MODE

STATION PRE-SET MEMORIES

is most useful when traveling in a new area where you are not familiar with the local

stations.

bq

To set any of the 6 pre-set memories in each band, use the following procedure:

1.Turn the radio on and select the desired band.

2.Select the first station to be pre-set using the MANU/SKIP bm tuning controls.

3.Press the pre-set button to be set and continue to hold it in for approximately 2 seconds. The pre- set number, will appear on the display panel to the right of the frequency indication and a single beep will sound, indicating that the station is now set into that pre-set memory position. The station can now be recalled at any time by pressing that button.

4.Repeat the above procedure for the remaining 5 pre-sets on that band and for the other 4 bands on the unit.

br VACUUM FLOURESCENT DISPLAY (VFD)

The Vacuum Fluorescent Display (VFD) panel displays the frequency, time, and activated functions using one of three illumination levels as selected by the POWER/ILL button 1.

bs POWER LEVEL METER DISPLAY

This display consists of a left and right six- bar graph which provides a visual representation of the audio signal level. As the signal increases, the number of illuminated segments will increase and vice- versa.

bt MODE SELECTOR (MODE)

This button is used to select the radio, CD player, auxiliary (AUX) input or CD changer (if installed) playback mode. Each press of the button will select a different mode as indicated on the display panel.

During CD player operation, this button may be used to change to radio, CD player, AUX input (MP3 or external CD player) or CD changer mode without ejecting the disc. The DISC indication will remain on the display panel to show that the CD changer is operating. Press the button again to return to return to the desired mode.

bu DISC SLOT

With the front panel in the fold-down position, gently insert the disc into the slot (label surface facing up) until the soft-loading mechanism engages and pulls the disc in. The S--CDPindication will appear on the display panel for 5 seconds. The ( ) indication illuminates and becomes animated, the symbol lights, and the track number appears on the display panel.

CAUTION: This unit is designed for play of standard 5" (12cm) compact discs ONLY. Do not attempt to use 3" (8cm) CD-Singles in this unit, either with or without an adapter, as damage to the player and/or disc can occur. Such damage will not be covered by the Warranty on this product.

cl TRACK SELECT ( / )

The Track Select function of the TUNE/ SEEK/TRACK buttons are used to quickly access the beginning of a particular track when a disc is in play. Each time the Forward

TRACK Select () side of the button is pressed, the next higher track number will

OPERATING INSTRUCTIONS

9