Safety Label

3 3

The safety (listing) label is on back of the stove. A copy of the safety label is shown below.

Prairie

Vented Gas

Fireplace Heater

Report No. 028-S-28-5

Certified for USA & Canada

Tested to: ANSI Z21.88b-1999/CSA 2.33-M99 “Vented Gas Fireplace Heater”, CAN/CGA 2.17-M91 “Gas-Fired Appliances for use at High Altitudes”, and UL307b-1995 “Gas Burning Heating Appliances for Manufactured Homes”

Must be installed in accordance with the manufacturer’s installation instructions and all local codes, if any; if not, follow current ANSI Z223.1, NFPA 54 and CGA B149. This vented gas fireplace heater is equipped at the factory for use with natural gas. If conversion to propane (LP) fuel is desired, the optional factory conversion kit must be used. This appliance uses a millivolt-type control system consisting of a gas control valve/reg- ulator, a standing pilot burner assembly, a thermopile, a piezo ignitor, and the ON/OFF switch. THIS UNIT DOES NOT REQUIRE 110 VOLT POWER TO OPERATE. All exhaust gases must be vented outside the structure of the living-area. Combustion air is drawn from outside the living-area structure. This appliance is only for use with the type of gas indicated on the rating plate and may be installed in an aftermarket, permanently located, manufactured (mobile) home where not prohibited by local codes. See owner’s manual for details. This appliance is not convertible for use with other gases, unless a certified kit is used. May be installed in a bedroom - in Canada install with a listed thermostat, in the USA install per local codes.

This vented gas fireplace heater is not for use with air filters.

WARNINGS:

Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Refer to the information in the owner’s and installation manual provided with this appliance. For assistance or additional information consult a qualified installer, service agency or the gas supplier.

Installation and repair should be performed by a qualified service person. The appliance should be inspected before use and at least annually by a qualified service person. More frequent cleaning may be required where excessive lint from material like carpeting and bedding is present. The control compartment, the burner compartment and all circulating air passageways of the appliance must be kept clean and clear at all times. See installation instructions accompanying appliance.

Due to high temperatures, the appliance should be located out of traffic and away from furniture and draperies. This appliance must not be connected to a chimney flue servicing a separate solid fuel burning appliance.

Operation of this appliance when not connected to a properly installed and maintained venting system or tampering with the blocked vent shutoff system can result in carbon monoxide (CO) poisoning and possible death.

Vented gas fireplace heater - Not for use with solid fuel.

Children and adults should be alerted to the hazards of high surface temperature and should stay away to avoid flesh burns or clothing ignition. Young children should be carefully supervised at all times when they are in the same room as the appliance.

CAUTION:

Do not operate this appliance with glass removed, cracked or broken. Replacement of the panel(s) should be done by a licensed or qualified service person.

Hot while in operation. Do not touch. Keep children, clothing, furniture, gasoline and other liquids having flammable vapors away. Risk of electrical shock. Switch the household breaker off or remove fuse before servicing unit.

Use Simpson DURA-VENT direct vent system (Model GS) to vent this appliance to the exterior (direct discharge only without duct connection).

Minimum Clearances to Combustibles

Stove Top to Sidewall

9-1/2"

Alcove Min. Height

58”

 

10”

 

Stove Top to Backwall

 

 

Alcove Max. Depth

45”

 

5”

 

Stove Top to Cornerwall

5”

Alcove Min Width

47”

 

Glass Front of Unit

36”

 

 

 

 

 

 

 

 

 

 

L.P.

N.G.

 

L.P.

N.G.

Input Rate on “HI” (BTU/Hr)*

31,000

31,000

Minimum Inlet Pressure (inches W.C.)

11”

5.5”

Input Rate on “LO” (BTU/Hr)*

23,000

24,900

Maximum Inlet Pressure (inches W.C.)

13”

7”

 

 

 

Manifold Pressure on “HI” (inches W.C.)

10”

3.5”

This appliance is equipped only for altitudes 0-2000 ft. (0-610 m) in USA; in Canada, 0-4500 ft. (0-1370 m).

Electrical Rating: 115v, 1.5 Amps, 60 Hz

Manufacture Date:

2000

2001

2002

Jan.

Feb.

Mar.

Apr.

May

Jun.

Jul.

Aug.

Sep.

Oct.

Nov.

10850 117th Pl. N.E. Kirkland, WA 98033

Dec.0380

Travis Industries

9 3 5 0 8 1 1 5

4 0 5 0 1 1 3

Page 33
Image 33
Avalon Stoves Freestanding Stove owner manual Safety Label, Prairie

Freestanding Stove specifications

Avalon Stoves has earned a reputation for quality and innovation in the hearth industry, and their Freestanding Stove is a testament to this commitment. Designed to provide both aesthetic appeal and efficient heating, the Avalon Freestanding Stove is an excellent choice for those looking to elevate their home’s ambiance while ensuring warmth during cold months.

One of the main features of the Avalon Freestanding Stove is its powerful heating capacity. With advanced firebox engineering, it can efficiently heat areas ranging from 1,200 to 2,500 square feet, depending on the model and installation. This versatility makes it suitable for a variety of home sizes and layouts, providing an inviting warmth for family gatherings or cozy nights in.

The stove is built with high-quality materials, featuring a heavy-duty cast iron construction that ensures durability and longevity. The high-temperature ceramic glass window offers not only a beautiful view of the fire but also serves a functional purpose by withstanding intense heat. This adds a charming focal point to any room while allowing users to safely enjoy the flicker of flames.

Equipped with advanced technologies, the Avalon Freestanding Stove incorporates a clean-burning system that meets stringent environmental regulations. The primary and secondary air combustion systems work harmoniously to maximize efficiency while minimizing emissions. This ensures that the stove not only heats effectively but also contributes to a cleaner environment, making it an environmentally responsible choice.

Another notable characteristic is its customizable design options. Avalon offers a range of finishes, including traditional cast iron and modern enamel, allowing homeowners to select a style that complements their decor. Additionally, the stove’s compact footprint allows it to fit seamlessly into various spaces, making it a versatile option for homes of different sizes.

User-friendly features are also a hallmark of the Avalon Freestanding Stove. The easy-access lid and large ash pan make maintenance a breeze, ensuring that cleaning is relatively hassle-free. The adjustable air control allows for precise flame regulation, giving users the ability to control the heat output effortlessly.

In summary, the Avalon Freestanding Stove combines powerful heating capabilities with environmentally friendly technologies, timeless design options, and user-friendly features. It stands as an excellent investment for those looking to enhance their living space with both functionality and style. Whether it's for the warmth or the aesthetic, Avalon’s Freestanding Stove is a remarkable addition to any home.