40

Optional Equipment

Outside Air Boot Installation (Part number 99200134)

The outside air boot routes outside air to the stove for combustion. Refer to the section "Outside Air Requirements" on page 11 for installation concerns. The directions below detail installation.

1 Install the cover plate following the directions below (use the correct cover plate).

Remove the two screws on the cover plate to remove the piece that fits over the air control rod. Then replace the piece when the cover plate is in place.

Air Control Rod

The cover plate has a clip which attaches it underneath the air control.

2Refer to the illustration below to determine the location and size of the hole penetrating the floor. Cut the hole prior to locating the stove.

3Attach gasket to the bottom edge of the lower air boot section (near the screen). Attach gasket on top of the flanges on the upper air boot section. Slide the two sections together with both seams facing the rear (do not attach the two sections at this time).

4Follow the directions below for attaching the upper section of the air boot (with gasket) to the stove.

5Slide the lower section down until it contacts the hearth. Attach the two sections together following the directions below

 

 

Use a

Bottom of Stove

 

screwdriver to

 

 

 

 

pry out the

Attach the included

 

knock-out.

gasket to all four top

 

 

 

edges of the air boot.

 

 

 

 

 

Attach the air boot with

 

 

the two screws included

 

 

with the kit.

 

 

 

 

1/4" Nutdriver

 

 

Use the included screws to attach

 

 

the two telescoping portions of air

 

 

boot together. The included drill bit

 

5-1/8”

should be used to drill the hole.

 

 

8-7/8”

 

Make sure the air boot is expanded

 

to the correct size before drilling.

Attach gasket to the bottom

 

 

 

 

edge of the air boot.

 

 

 

 

 

9/64” Drill Bit

5/16" Nutdriver

 

 

The hole in the floor (and hearth)

 

 

must be a minimum 16 square

 

 

inches. It should be 1/2” smaller

 

 

than the footprint of the air boot in

Floor (and hearth)

 

each dimension to allow for the

 

 

gasket to seal.

Travis Industries

100-01140

4 020628

Page 40
Image 40
Avalon Stoves Rainier owner manual Outside Air Boot Installation Part number

Rainier specifications

Avalon Stoves has long been synonymous with quality and innovation in the fireplace and heating industry. Among its distinguished lineup is the Avalon Rainier, a stove that embodies both modern aesthetics and cutting-edge heating technology. Designed for those who appreciate the warmth of a fire while also seeking efficient heating solutions, the Rainier stands as a testament to Avalon’s commitment to excellence.

One of the standout features of the Avalon Rainier is its impressive heating capacity. With the ability to heat spaces up to 2,000 square feet, this stove is perfect for larger homes or open-concept living areas. The Rainier boasts a powerful EPA-certified firebox, which enhances its efficiency and reduces emissions, ensuring that you not only enjoy the ambiance of a fire but also adhere to modern environmental standards.

The stove's advanced combustion technology is another remarkable characteristic. The Rainier employs a secondary combustion system, allowing for a cleaner burn and maximized heat output. This system significantly reduces the amount of smoke produced, providing a more pleasant experience while increasing the lifespan of the stove. The result is a cleaner environment and extended fuel efficiency.

In terms of design, the Avalon Rainier does not disappoint. It features a contemporary aesthetic that can seamlessly integrate into any home decor. With various finishes and optional tile surrounds, personalization is easy, allowing homeowners to dial up their unique style. The large viewing window enhances the visual appeal of the fire, inviting the warm glow into any room.

User-friendly functionalities set the Rainier apart from its competitors. The stove includes an intuitive air control system that allows for precise adjustments of the heat and burn rate. Additionally, the optional blower system enhances air distribution, ensuring that even the far corners of your home receive optimal warmth.

Durability is paramount in the construction of the Avalon Rainier. Made from high-quality materials, including heavy-duty steel and cast iron, the stove is built to withstand the rigors of daily use while maintaining its elegant look.

In summary, the Avalon Stoves Rainier offers an impressive combination of heating efficiency, desirable aesthetics, and user-friendly features. Whether you are looking to reduce your heating costs or simply enjoy the cozy atmosphere of a wood-burning fire, the Rainier is an excellent choice that exceeds expectations. Its commitment to both performance and design makes it a standout option for any homeowner.