?Setting the Temperature Control

?Your Wine Chiller has only one control for regulating the temperature. The temperature control is located on the upper right hand corner of the compartment.

?To control the internal temperature, adjust the control knob according to the ambient temperature or purpose of use.

?The first time you turn the unit on, set the temperature control to “MAX” position.

?The settings of temperature control are from “MIN” to “MAX”. After 2 hours, adjust the temperature control setting to “MED”. The setting of “MED” should be appropriate for home or office Wine Chiller use.

NOTE:

?The range between “MAX” and “MIN” is from 51 ? F to 62? F, which is ideal for the storage of most wines. The medium (MED) position on this unit is set at 55ºF.

?Turning the temperature control to "OFF" position stops the cooling cycle but does not shut off the power to the appliance.

You must install your electronic Wine Chiller in a place where the ambient temperature is between 72- 78 degrees Fahrenheit. If the ambient temperature is above or below recommended temperatures, the performance of the unit may be affected. For example, placing your unit in extreme cold or hot conditions may cause interior temperatures to fluctuate. The range of 51 -62 degrees Fahrenheit may not be reached.

You can place two bottles on each shelf plus two on the bottom compartment.

Recommended temperatures for chilling wine:

 

 

Degrees

 

Control Position

Red Wines:

57-62?F (14

-17ºC)

MIN

Dry/White Wines

54-57?F (12

-14ºC)

MED

Rose Wines

51-53?F (11

-12ºC)

MAX

?Interior Light

The light switch is located on the upper right hand corner of the compartment, on the temperature control box. You can turn the interior light ON or OFF by pressing the light switch.

?Door Lock (Only for EWC12)

Your unit is provided with a lock and key combination.

The keys are located inside the plastic bag that contains the User’s Guide. Insert the key into the lock and turn it counterclockwise to unlock the door. To lock the door do the reverse operation making sure metal pin is engaged completely. Remove the key and place it in a secure place for safekeeping.

CARE AND MAINTENANCE

?Cleaning Your Wine Chiller

?UNPLUG the Wine Chiller, and remove all items including shelves.

?Wash the inside surfaces with a warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water.

?Wash the shelves with a mild detergent solution.

?Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical parts.

?Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a clean soft cloth.

CAUTION

Failure to unplug the Wine Chiller could result in electrical shock or personal injury.

10

Page 10
Image 10
Avanti EWC12 EWC120B instruction manual Care and Maintenance, ? Setting the Temperature Control