CASTER (WHEEL) INSTALLATION
Your Beverage Cooler is designed to either be free standing in a fixed position or moveable using the casters (included). Follow the instructions below to correctly install the casters.
STEP 3 STEP 2 STEP 1 WARNING WARNING
This unit is very heavy and this process should not be done by one person alone. To avoid injury to yourself and/or damage to the unit we recommend that you proceed according to the following steps using 2 or more persons.
To avoid damage to the unit during installation, be sure that the area you are going to be working in is:
• Clean
• Soft stable surface for working
• Flat and level
Lay the cabinet down on a soft stable surface to avoid:
•scratching the unit
•damage to the back panel
Using a Phillips head screwdriver.
Install each caster as shown using four (4) M6 screws for each caster.
Be sure that you install the two (2) casters with brakes in the front of the unit as shown.
Installation Complete.
Carefully stand the unit upright and allow it to stand for a minimum of 2 hours before connecting to the electrical outlet.
HANDLE INSTALLATION
Follow the instructions below to correctly install the handle.
1 | Lay the cabinet down on a soft stable surface to avoid: | ||
STEP | • | scratching the unit | |
• | damage to the back panel | ||
| |||
|
| ||
2 | Using a allen wrench. | ||
|
| ||
STEP | Install handle as shown using six(6) M6 screws for handle. | ||
|
| ||
|
| ||
3 | Installation Complete. | ||
|
| ||
STEP | Carefully stand the unit upright and allow it to stand for a minimum of 2 hours before connecting to | ||
the electrical outlet. | |||
|
|
|
9