Additional phone features
99
Normal Mode (see “Using Resume Normal Mode” on page100 ) or by
waiting for 10 minutes.
Local Mode
If the WAN connection fails, the IP Deskphone loses communication with
the Main Office Telephone Preference Service (TPS). It then registers
with the MG 1000B and receives telephone services from the MG 1000B.
When in Local Mode, the telephone displays the message LOCAL
MODE.
This section provides more information on the following topics:
• Using Test Local Mode
• Using Resume Normal Mode
• Troubleshooting MG 1000B
Using Test Local Mode
Use Test Local Mode to check Local Mode functionality (make and
receive telephone calls). Test Local Mode is useful when provisioning has
changed for an IP Deskphone on an MG 1000B Controller.
1. Press the Services key.
2. Press the Up/Down navigation keys to
scroll up or down, and then highlight
Test Local Mode.
3. Press the Enter key (the telephone
resets and registers back to the Main
Office).
(Services)