D 14126.01
01.2008 4
TANDBERG 150 MXP
USER GUIDE
Table of
Contents
Operating
Principles
Making
Video
Calls
Making
Calls Using
Phone Book
Phone Book
Details
Incoming
Calls
Calling More
Than One
Video Meeting
Features
Contact
Information
Unpacking &
Installation
Making
Telephone
Calls
Unpacking &
Installation
TANDBERG 150 MXP
USER GUIDE
Unpacking and Installation
Assembling the unit is really easy. The sy stem lies fully
assembled in the box. Remove the ac cessories box and
carefully lift the system out o f the box. To protect the camera
lens while installing, we recomme nd that you let the camera
lens cap remain on. In the accessor ies box you should find:
LAN cable•
Power adapter and power cable•
Please report any discrepan cies to your TANDBERG
Representative immediately.
Handset is an optional device that must be orde red separately.
Contact your TANDBERG represe ntative for more informatio n.
How to configure the unit is
described in Administrator
Settings (separate document).

Assembling the Unit

Mounting the (optional) Handset

Slide the handset
bracket into the
system’s bottom plate
tracks. Place the
system in an upright
position and lay the
handset in its place.
The handset is held in
place by magnets.

Connecting Cables

Socket for optional handset’s cable.
See lower left corner of this pa ge for
details.
Socket for optional headset. The
TANDBERG 150MXP has a 2.5mm 3-pole
mini-jack connector at it s right side
marked with a headset symbol. Thi s
allows the user to connect a standa rd
telecommunications headset to t he
system.
Headsets with the microphon e positioned
in front of the user’s mouth, connecte d to
the earphone through a rod, ten d to give
more echo than earbud headset s with
the microphone attached t o the cord.
TANDBERG recommends the Plantr onics
MX100 headset (http://www.plantronics.
com, products > mobile).
Note that the maximum outer diam eter
of the plug must be 9.0 mm or smaller.
A plug with a bigger outer diamete r will
not fit the unit. Alternative ly an extension
cord may be used.
Connect your LAN
(Local Area Network)
here.
If you have a single LAN connec tion
only and this is in use by your PC
already, connect your PC to the
150MXP and the 150MXP to the
LAN to let both units have intern et
access.
Connect Power
here.