The Wireless Phone

7. Softkeys:

Used to navigate to or initiate certain features as well as control certain actions within the features. These keys correspond to the text prompts in the display screen immediately above them.

8.Power On/Start Call:

Used to turn your phone on. Press and hold Power On until two chirps sound (approximately one second). Release the key. The in-service tone sounds and your extension number is displayed. The phone is now on standby mode. To make and receive calls, press Power On again.

9.Battery Release: You can release your phone's battery (to charge) by pressing both left and right battery release buttons at the same time.

10.FCN:

Used to display the Standby menu enabling you to set various preferences such as, system information and ring options. When in standby mode (on, but not in use), press and briefly hold FCN to display the Standby menu.

11.Charging Contacts:

Provides a contact between your phone and a charger when your phone is placed, facing forward, in a charger.

12.Headset Jack:

Located at the bottom of the phone. Provides a port for connecting a headset.

13.LINE

If multiple lines are available, your phone system may require you to select a line before dialing a number. Press LINE and the number key of the line you wish to use. A dial tone is heard.

14.MENU:

This button is unavailable.

15.Power Off/End Call:

To turn your phone off, press and hold Power Off. One chirp sounds and the phone turns off. Your phone cannot be directly turned off during a call, you must end the call first and then turn the phone off.

16.Softkey Function Display Area:

The information displayed varies according to the corresponding softkey pressed. The five softkeys are Transfer, Conference, Hold, Mute and Redial. Press the left or right side of the key to activate the corresponding softkey feature. See Using the Softkeys.

17.Push-to-Talk Radio Control:

Used for incoming and outgoing radio communication by utilizing a common channel. You can enable any PTT channel by entering the corresponding number from the keypad. The default channel is the lowest allowed channel as set in the Admin menu.

18.Shortcut Menu and Main Display Area:

The Shortcut Menu lists the feature shortcuts and descriptions. When in standby mode (on, but not in use), press and briefly hold FCN to display the Standby menu.

19. Battery:

Indicates the amount of charge remaining in the battery pack. The level indications are approximations of the remaining battery pack life, they do not indicate equal amounts of battery pack life. When only one level remains, the battery pack needs to be changed.

Battery Low - This message is displayed and an alarm sounds when the phone is in standby mode and the battery pack is critically low. The phone cannot be used until the battery pack is charged.

Backlight:

The backlight comes on when any key is pressed or when there is an incoming call and stays on for ten seconds. It turns off after ten seconds if another key is not pressed within that period.

3600 Series Wireless User Guide

Page 7

IP Office

[15-601104] Issue [1] (1 June 2006)

Page 11
Image 11
Avaya 3600 manual Push-to-Talk Radio Control