3600 Series Wireless Phone User Guide
To charge your phone with a desktop charger:
1.Place the desktop charger on a flat, horizontal surface and plug the power supply into the desktop charger and then into an appropriate wall outlet.
2.To end any call in progress, press End Call before you place your phone into the desktop charger. Your phone can be off or in standby mode during charging.
3.Place your phone into the desktop charger slot, facing forward.
If the phone is placed correctly, the red indicator will come on. The indicator light will not come on if the slot is empty, if the phone is improperly seated or when the desktop charger has no power applied.
While the phone is charging in standby mode, the extension number and Charging...is displayed The battery icon will show charging progress. The phone is fully operational and will ring if called.
While the phone is charging while turned off, only Charging...is displayed and no calls will be received. The dots race during the charging cycle. It is normal for the battery pack to become warm whilst charging.
Your phone is fully charged when Charge Complete is displayed. The indicator light will remain on until the phone is removed.
Dual Chargers
TheDual Charger is a
3616 Phone in DCE200 Dual Charger | 3626 Phone in DCX200 Dual Charger |
The models are not interchangeable. Full charging is accomplished in approximately one and a half to two hours for either slot.
To set up the dual charger, you must first obtain an appropriate Avaya power supply for your country or region.
3600 Series Wireless User Guide | Page 26 |
IP Office |
