7IXXMRK9T)QEMP2SXMJMGEXMSR
36 Avaya™ ATM WAN Survivable Processor Manager Installation and Configuration
4. Click Test Connectivity.
This tests the connection between the ASP Manager server and the selected WSP, for
both the Upload/Download login and the Administration login. If you encounter any
error messages, see ‘‘Troubleshooting’’ on page 38.
5. Click OK.
7IXXMRK9T)QEMP2SXMJMGEXMSR
Release 1.1 introduced an E-mail notif ication feature. To set up this feature, complete the
following steps:
1. Choose Tools>Email Notification Configuration.
2. Specify the IP address of the (SMTP) E-mail server that ASP Manager can send
messages to.
3. Specify whether or not this E-m ail server requires authentication, and if it does, enter
the login name and password that ASP Manager should use to send messages.
4. Specify under which conditions ASP Manager should send messages.
5. Specify the E-mail address where ASP Manager should send messages.
To do so, click Add, enter the E-mail address, and click OK. Repeat to add more.
6. Specify the name that you want to appear in the “From” line when ASP Manager
sends E-mail.
7. To test the notification feature, click Test.
ASP Manager sends a test message. If the values that you specified in Step 5 are valid,
then the email addresses that you specified will receive the test message.
8. To close the dialog box and save your settings, cl ick OK.
9WMRK%741EREKIV
Refer to ASP Manager’s embedded online help for instructions on how to use the product.