Avaya ALGO-3226-CM manual Configure Algo 3226 Trunk Port FXO Doorphone

Lastly, specify the loop start trunk group in route pattern 100/

change route-pattern 100					Page	1 of	3
		Pattern Number: 100 Pattern Name: 3226 Doorphone
			SCCAN? n		Secure SIP? n
Grp FRL	NPA Pfx Hop Toll No.			Inserted		DCS/ IXC
No		Mrk Lmt List Del		Digits		QSIG
			Dgts			Intw
1: 100 0						n	user
2:						n	user
3:						n	user
4:						n	user
5:						n	user
6:						n	user
BCC VALUE		TSC CA-TSC	ITC BCIE Service/Feature PARM No. Numbering LAR
0 1 2 M	4 W	Request			Dgts Format
					Subaddress
1: y y y y	y n	n	rest				none
2: y y y y	y n	n	rest				none
3: y y y y	y n	n	rest				none
4: y y y y	y n	n	rest				none
5: y y y y	y n	n	rest				none
6: y y y y	y n	n	rest				none

6. Configure Algo 3226 Trunk Port FXO Doorphone

The 3226 Trunk Port FXO Doorphone is pre-configured for a typical installation. Programming is only required to change default setting or for more advanced applications. For this compliance test, no additional configuration was required. The doorphone was connected to a port of an MM711 Analog Board on the G450 Media Gateway. For installation and configuration instructions, refer [2].

JAO; Reviewed:	Solution & Interoperability Test Lab Application Notes	6 of 8
SPOC 11/3/2011	©2011 Avaya Inc. All Rights Reserved.	Algo-3226-CM