Avaya 3626, Desktop Charger manual Setting User Preferences, User Option Menu Action

Avaya 3626 Wireless Telephone, Desktop Charger, and Gang Charger with CCMS

Setting User Preferences

When the Wireless Telephone is in standby mode (on but not in use), press and briefly hold FCN to display user options. Check with your system administrator for specific features supported by your Wireless Telephone.

►(Right arrow) displays next menu item.

◄(Left arrow) displays previous menu item. 0 (Zero) selects or changes item.

FCN returns to previous menu level.

Power Off/End Call	exits menus
User Option Menu		Action:
Ring Type	Select Telephone Ring to set the	Press 0 to select
	standard ring on the Wireless	desired ring type. The
	Telephone.	ring type currently set
	Normal: is the factory default ring.	displays with an
	Vib/norm ring: vibrates for 5	asterisk.
	seconds and then rings.
	Vibrator ring: vibrates for a non-
	audible call alert.

High Noise Mode Adjusts the Wireless Telephone to account for background noise. Normal: for most office environments

High: for moderate background noise

Severe: for extremely noisy conditions.

Current IP address In IP systems, the IP address of the Wireless Telephone is displayed. This number may not be edited.

Select an option that describes the noise in your environment.

None

Extension	This number is used to identify the	Use keypad to enter
	Wireless Telephone and is for	extension number
	display purposes only.
Push to talk	Channel selection	Enter number to
	1-8: selects the channel used for	select channel.
	two-way radio transmission and
	monitoring.
	Enable turns on PTT mode.	Select Enable or
	Disable turns off PTT mode.	Disable

(Additional options may be present. Contact your system administrator for information.)

555-301-710	Page 17
Issue 2