5 Upgrading an Existing G700 with an S8300: Upgrade the Firmware on the G700
Installation and Upgrades for G700 with S8300 or S8700
555-234-100 — Issue 3 — May 2003 233
Example: Show mgp bootimage
4. At the MG-???-1(configure)# prompt, type
copy tftp mgp-image <bank> <filename> <tftp_server_ip_address>
to transfer the mgp image from the tftp server to the G700, where
<bank> is the bank that is not Active Now (Bank A in the example).
<filename> is the full path name of the mgp firmware image file, which begins with mgp and
will be similar to the name mgp_8_0.bin.
<tftp_server_ip_address> is the IP address of the S8300. See the following example:
copy tftp mgp-image a mgp_8_0.bin 195.123.49.54.
The screen will show the progress.
5. Type set mgp bootimage <bank> where <bank> is the same letter you entered in the
previous step.
6. At the MG-???-1(configure)# prompt, type reset mgp.
A system prompt asks to confirm the reset.
7. Select Yes at the dialog box that asks if you want to continue.
The G700 Media Gateway processor will reset. The LEDs on the G700 Media Gateway and the
Media Modules will flash. These elements will each conduct a series of self-tests. When the LEDs
on the Media Modules are extinguished and the active status LEDs on the G700 Media Gateway
are on, the reset is complete.
8. Verify that the download was successful when the prompt returns.
Type show mg list_config. The system displays the list of software.
FLASH MEMORY IMAGE VERSION
Bank A 109
Bank B 210
ACTIVE NOW ACTIVE AFTER REBOOT
Bank B Bank B