Avaya G700 Note: For most Windows-based PCs, you access the HyperTerminal program from the

1 Roadmap and Reference: Connection and Login Methods
56 Installation and Upgrades for G700 with S8300 or S8700
555-234-100 — Issue 3 — May 2003
you will be given a much more restricted list of command possibilities that address the possible
interfaces to be set.
For a complete list of command line interface commands, type help or refer to the "Avaya™ P330 User’s
Guide" (available at www.avaya.com/support).
Log in to the P330 Stack Processor with a LAN Connection
1. With a connection to the customer’s LAN (either remotely or on site), telnet to the P330 stack
processor IP address:
Type telnet <xxx.xxx.xxx.xxx>, where <xxx.xxx.xxx.xxx> is the IP address of
the P330 stack master processor on the customer’s LAN.
2. Login at the Welcome to Avaya P330 screen.
Login: xxx from the planning documentation
Password: xxx from the planning documentation
You are now logged-in at the Supervisor level. The prompt appears as P330-1(super)#.
Log in to the P330 Stack Processor with a Direct Serial Connection
Use this procedure to access the G700 processors when your laptop is directly connected to the
Console port via a serial cable.
To access the G700 via the Console (serial) port
1. Launch Windows® HyperTerminal or any other terminal emulation program.
Note: For most Windows-based PCs, you access the HyperTerminal program from the
Start menu by selecting Programs, then Accessories.
2. Choose Call - Connect (for HyperTerminal) or the appropriate call command for your terminal
emulation program.
3. Login at the Welcome to Avaya P330 screen.
Login: xxx from the planning documentation
Password: xxx from the planning documentation
You are now logged-in at the Supervisor level. The prompt appears as P330-1(super)#.
Log in to the P330 Stack Processor with Device Manager
To access the Device Manager, you must have access to the corporate LAN in which the P330 Stack
Processor resides. Then, to access Device Manager, do the following:
1. Open a compatible Internet browser on your computer. Currently this includes Internet Explorer
5.0 (or higher) and Netscape Navi g ator 4.7 and 6.2. The Java Plug-in 1 .2.2 or 1.3.1 is required.
2. In the Address (or Location) field of your browser, type the IP address or name of the P330 S tack
Processor and press Enter.
- If the network includes a domain name service (DNS) server that has been administered with
this IP device’s name, you can type the processor's name into the address field instead of the
IP address. For example, http://P330-stack1.mycompany.com