3 Installing a New G700 with an S8300: Administer Communication Manager
Installation and Upgrades for G700 with S8300 or S8700
555-234-100 — Issue 3 — May 2003 153
Administer the Media Gateway
To perform the procedures in this section, telnet to the primary controller, log in, and open a SAT session.
!CAUTION:
Before administering a media gateway, make sure that the gateway has been fully
configured.
Add Media Gateway
1. At the SAT prompt, type add media-gateway <number>
where <number> is the gateway number from 1 to n . (n is 50 for an S8300 and 250 for an
S8700).
The S8300 displays the Media Gateway screen.
Add Media Gateway Screen
2. Complete the Name field with the hostname assigned to the G700 Medi a G ateway.
3. Complete the Identifier field with the serial number of the G700 Media Gateway. You can
obtain the serial number by typing the show system command at the MGP command line.
!CAUTION:
Be sure the serial number for the G700 Media Gateway you enter in this proce dure matches
exactly the serial number displayed in the show system command. The ser ial number is
case-sensitive, and if entered incorrectly, will prevent the S8300 Media Ser ver from
communicating with the G700 Media Gateway.
change media-gateway 1 Page 1 of 1
MEDIA GATEWAY
Number: 1
Name: Swainsons Identifier: 012X06230551
IP Address: MAC Address:
Network Region: 1 Location: 1
Site Data: Registered? n
Slot Module Type
V1:
V2:
V3:
V4:
V8:
V9: