Chapter 1

Quick Start

 

 

Note: You must install the depth-adjusting plates before installing any modules.

To install the plates perform the following steps:

1When facing the hub, align each plate so that the narrow flange is toward the rear of the hub, facing out. See Figure 1.1.

2From inside the hub, screw on the 4 flat-headed screws to secure the plate to the side of the hub.

Figure 1.1 Attaching the Depth Adjusting Plate

Decorative Edge Panels

The two plastic side-panels can be removed to allow access to the screw holes. Simply unclip the panels and replace them. The panels are interchangeable.

2

Avaya M770 User’s Guide