AVerMedia® AVerEPack300 User’s Manual

Connecting the LCD Projector

To display the slide presentation on LCD projection screen, you’ll need to connect one end of the VGA cable (not supplied) to the D-side panel of AVerEPack300 “VGA” port and the other end to the LCD projector “Computer” port.

Set the DIP switch no. 2 to VGA mode located at the C-side panel of AVerEPack300 beside the “Power” port.

 

 

 

C

 

AVerEPack300 D-Side Panel

B

D

 

 

 

A

DIP SWITCH

LCD PROJECTOR

 

 

VGA Cable

 

 

 

(not supplied)

 

 

ON

1 2

 

 

Connecting a SCART RGB Monitor

If you are using a SCART RGB monitor, connect the monitor to the “SCART RGB” port at the D-side panel of AVerEPack300 using the SCART RGB cable. (The SCART RGB cable is an optional accessory cable with the AVerEPack300.)

SCART RGB Monitor

Set the DIP switch no. 2 to TV mode then from DIP switch no. 1 switch the TV system to PAL. The DIP switch is located at the C- side panel of AVerEPack300 unit beside the “Power” port.

SCART

RGB Cable

(optional)

DIP SWITCH - PAL TV SYSTEM

ON

1 2

AVerEPack300 D-Side Panel

8