Chapter 2 Hardware Installation and Setup

Connecting the TV

To display the slide presentation on TV (or any video monitor), you’ll need to connect the TV to one of the ports at D-side panel of AVerEPack300.

If the TV set uses the composite video standard, connect the TV to the D-side panel of AVerEPack300 “VIDEO” port using the supplied AV Cable.

If the TV set uses the S-Video standard, connect the TV to the D-side panel of AVerEPack300 “S-VIDEO” port using the supplied S-Video Cable.

AVerEPack300 D-Side Panel

C

B D

A

S-Video Cable

 

AV Cable

(supplied)

 

(supplied)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VIDEO-IN

S-IN

Rear of TV

Set the DIP switch no. 2 to TV mode then from DIP switch no. 1 switch the proper TV system you have. The DIP switch is located at the C-side panel of AVerEPack300 unit beside the “Power” port. If you are not sure of your TV system, please refer to your TV manual.

DIP SWITCH - PAL TV SYSTEM

DIP SWITCH - NTSC TV SYSTEM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ON

1 2

ON

1 2

9