Chapter 3 Using the Application
Running the AVerEPack300 Program
To run the AVerEPack300, click Start, select Programs, select AVerEPack300 and then click AVerEPack300.
Whenever you start using the AVerEPack300 program, a Device Status dialog box always prompt to inform you about the power and the cable connection of the AVerEPack300 unit to your PC.
This indicates that you have properly connected the AVerEPack300 unit to your PC.
If you have inserted a CompactFlash card, the content of the card will be displayed.
Click OK to start using the program.
This indicates that your AVerEPack300 unit is not connected to your PC.
You may start using the application without making the connection.
Click OK to start using the program.
11