AVerMedia® AVerEPack300 User’s Manual

The time value settings in minutes appear as follows: 0~10, 15, 20, 30, 40, 50, 60, 90 and 120.

4. After selecting a time value, press the MENU button to close the menu.

To View the Countdown Screen Display:
0:00:30

1.To display the previously set time value, press the TIMER button once. The format is in hours:minutes:seconds. AVerEPack300 automatically converts your settings to the above mentioned format.

2.To start the countdown, press the TIMER button the second time.

3.You can toggle the countdown screen display on and off by pressing the TIMER button.

Reference Function

This function allows you to store a slide into the memory and display it anytime whenever you press the REFERENCE button.

Storing the Slide in the Memory:

1.If you are in 16-slide preview mode, select the slide you want to store in the memory. (The designated number of the selected slide will be highlighted in yellow and blinks.) You may also store the fully viewed slide or single slide view in the memory.

2.Press REFERENCE button until the OK sign appear to store the selected slide in the memory.

Note: You can only store one slide at a time. If you restore another slide, this will replace the prevoiusly stored slide to the newly stored slide.

Viewing the Stored Slide in the Memory:

After you have stored a slide in the memory, you can view the stored slide anytime by pressing the REFERENCE button.

To continue viewing the previous slide before it was interrupted, press the

REFERENCE button.

26