AVerMedia Technologies AverEPack300 Transition Effects:, LEFT, RIGHT, STATUS, LOADING, SHARPNESS, INDICATOR, BRIGHTNESS, TRANSITION, SLIDE DELAY, 3~10, 15, 20, 25, 30, 45, 60, 120, 180 and

AVerMedia® AVerEPack300 User’s Manual

SHARPNESS : Press the RIGHT button to increase and the LEFT button to decrease the sharpness level. There are three

(3) brightness levels to choose from.

BRIGHTNESS : Press the RIGHT button to increase and the LEFT

button to decrease the brightness level. There are four (4) brightness levels to choose from.

SLIDE DELAY : Presets the period of time to display the slide before it loads the next slide. This function works during slide show. The time value settings in seconds are as follows: 3~10, 15, 20, 25, 30, 45, 60, 120, 180 and 300.

TRANSITION : Press the LEFT or RIGHT button to select the preferred transition effect.

Transition Effects:

LOADING

INDICATOR

The image transition will appear from the bottom to top.

The image transition will appear from the top to bottom.

The image transition will appear from the right to left.

The image transition will appear from the left to right.

The image transition will appear from the center to all sides.

:Turns the loading indicator function on and off. When the loading indicator is off, the symbol will not show up when the system is loading a slide.

STATUS : Indicates which modes you are currently using.

•TV SYSTEM: indicates whether your TV is “NTSC” or “PAL”.

•VGA: indicates the resolution of the displayed slide.

24