Chapter 4 Using the System

4.1.2Full Screen Display

On the Monitor Screen, you can click to switch to a full screen display.

You will see the system turning to a full-size display. To monitor a specific channel, move the cursor to the desired channel and click the left button to switch the desired channel to full screen. Click again to return to the multi-display mode. Right click your mouse to return to the Monitor Screen.

4.1.3Auto Scan

Click on the Monitor Screen to enable “Auto Scan”. The system will cycle the channels according to the split display mode in sequence.

When the quantities of enabled cameras are more than the split screens, the split screens will cycle different batches of cameras. Please refer to 4.1.1 for the batch cycles in different spilt display modes. The camera ID icons turn yellow when the cycled channels are displayed. You can set up the auto scan period in system setting dialog.

110