Chapter 3 Configuring the System

4.Conditions: This column shows the alarm triggered condition. Tick Motion or Video Loss boxes as the condition.

Motion: When you click Motion as an alarm condition, the system will treat motion as an event to trigger the alarm.

Video Loss: When you click Video Loss as an alarm condition, the system will treat Video Loss as an event to trigger the alarm.

5.Action:

You can set up multiple alarm actions to warn the administrator if the alarm conditions are satisfied.

Relay Output: Select the relay output numbers. Output relays when the alarm is triggered.

TV Out: Select this item to output the video to a TV set. The system will skip to the event channel immediately when an alarm event happens.

Launch E-MAP: The system will launch E-MAP when an alarm event is happened. The camera icon blinks when the alarm is triggered.

Enlarge Camera View: Tick the box to enable Enlarge Camera View. Cancel the tick to disable the function. If you select Video Loss as the only alarm condition, this function will be disabled.

Play Warning Sound: Tick the box to enable Play Sound alarm. Cancel the

100