AVerMedia NV1000/3000/5000/7000 User’s Manual

direction of PTZ camera lens.

6.Auto pan. After you setup Preset position numbers and the auto pan path

group, click to monitor positions in sequence.

7.Auto pan path group. After setting up Preset position numbers from the

server, you can enable the auto pan path group function according to your

demands from the client. Click, and you will find the PTZ camera lens cycles to the desired positions and stays for the appointed time that you setup from the server. Users can click the 4 auto pan path group buttons at the same time to monitor the 16 Preset positions cyclically.

8.Preset position numbers. Users can appoint Preset positions of the PTZ camera lens from the server. Follow the steps to set Preset position numbers.

A. Select a desired preset number.

B. Click direction buttons to adjust the PTZ camera lens to a proper position

C. Click to keep the assigned preset position number setting.

Repeat the same steps to set all preset position numbers.16 Preset position numbers are the maximum for a PTZ camera. Click the Preset position numbers to make the lens move to the desired positions.

9.Moving speed of camera lens. After you setup the preset position numbers,

you can adjust the moving speed of camera lens by clicking the direction

buttons to speed up/down the movement of lens. .

10.Save. After you determine the preset position, please click to keep the setting.

11.Exit. Click this icon to close PTZ camera controller.

4.7 Using Event Log Viewer

Click to check the Event Log Viewer dialog. The Event Log Viewer shows event logs, operation logs, POS logs, system logs and network logs.