AVerMedia NV1000/3000/5000/7000 User’s Manual

1-Cam display

4-Cam split display

9-Cam split display

16-Cam split display

8-Cam split display

13-Cam split display

If you only have 4 cameras connected, the 8-Cam/9-Cam/13-

Cam/16-Cam split display modes will be disabled automatically.

3.Date/Time/Free Space

This bar shows the current time, frame size and the hard disk’s free space.

4.Recording

Click to start recording. The button turns red when it is recording. Click it again to stop.

5.E-Map

Click to load your desired map according to your demands. You can change an E-map and locate cameras, sensors, and relays to desired positions. The DVR system can support up to 8 E-maps. Load BMP or JPG files as E-Maps.

6.Network

Click to allow inbound connections. When this function is enabled, the button turns red. Click it again to disable all inbound connections.

7.System Configuration

You can configure camera setting, record setting, network setting, schedule

setting, backup setting, sensor setting, relay setting, alarm setting and user

setting by clicking button.

8.PTZ

Click to configure an appointed PTZ camera. It will pop-up a PTZ setup dialog. Users can configure a PTZ camera according to their demands.

9.Display/Playback

Users can switch between Monitor Screen and Playback Screen by clicking the buttons.

10.Camera ID

In the Camera ID area, you can see number icons of the cameras. Under 1-Cam