12.Decide if you want to change the default (No) and press either l or r to display your selection. If you select “Yes,” the last tag in the batch is cut. The printer must feed one or two tags past the printhead to cut the last tag in the batch. Press N.
Cut After Batch?
Prompt? Yes
13.Decide if you want to see this prompt in Batch Entry mode and press either l or r to display your selection. If you select “Yes,” the last tag in the batch is cut. The printer must feed one or two tags past the printhead to cut the last tag in the batch. Press N.
Cut After Batch?
No r
14.Decide if you want to change the default (No) and press either l or r to display your selection. If you select “Yes,” the knife cuts before the first tag and cuts after batch, so the tags are cuts in strips. Press N.
No Cut Before?
Prompt? Yes
15.Decide if you want to see this prompt in Batch Entry mode and press either l or r to display your selection. Press N.
No Cut Before?
No r
16.Decide if you want to change the defaults (No) and press either l or r to display your selection. If you select “Yes,” the knife does not cut before the first tag in a batch, but does cut between each tag and after the last tag in a batch.
Press N.
Quantity?
Prompt? Yes