A scanner is optional for the keyboard. For more information about the scanner or other peripheral devices, refer to their User Manuals. Use this section to
♦operate the scanner.
♦troubleshoot the scanner.
♦clean the scanner’s window.
♦configure the scanner. Your ADK script should already be written to enable and configure the scanner for you.
The scanner must be connected before you can use it. See “Connecting the Scanner’s Cables” in Chapter 1 for more information.
O p e r a t i n g t h e S c a n n e r
CAUTIONDo not stare into the beam.
To scan a bar code:
1.Point the scanner at a slight angle to, and approximately four to eight inches from the bar code symbol.
2.Press the button on the scanner. When the scanner is in the stand, it automatically scans any bar codes held in front of the scanner’s window. Make sure you do not scan data twice or accidentally scan the wrong data.