You can also set the communication values by using the Keyboard’s Main Menu. The keyboard defaults are 9600 Baud, 8-bit Word Length, 2 Stop Bits, No Parity, and No Flow Control.

1.Press X on the keyboard within the first two seconds when the printer/keyboard are turned on to see the Keyboard’s Main Menu.

2.Select Setup. Press L or R until you see

SETUP

lCOM2 (Scanner) r

3.Press Enter. You see a list of communication options to change (Baud Rate, Word Length, Stop Bits, Parity, and Flow Control).

COM2 (Scanner)

 

Baud Rate

r

4.Press Enter to change the Baud Rate. Use L or R to scroll through the choices. Press Enter when the Baud Rate you need appears. Continue through the list for the other communication settings and make changes if necessary.

C-6Configuring the System