3.Decide if you want to see this prompt in Batch Entry mode and press either l or r to display your selection. Press N.

Quantity

1 _ _ _ _ _ _ _ _

4.Decide if you want to change the default (1) for the quantity of tags to print in a batch. Enter a quantity (1-32000).

Press N.

After setting the batch options, you are ready to use Batch Entry mode to enter data for your formats. See Chapter 3, “Entering Batch Data,” for more information.

Keep in mind the following definitions:

Number of Parts

Number of times data prints across the tag’s width.

 

Using one to print data once on the tag. Using three to

 

print data three times across the tag.

Cut Multiple

Number of tags printed between cuts as a set. A cut

 

multiple of one cuts after each tag. To cut after each

 

batch, set the cut multiple equal to the print quantity.

 

If the cut multiple is three and the print quantity is 15,

 

five sets of three tags are printed and cut (15 tags). If

 

the cut multiple is three and the print quantity is 16, five

 

sets of three tags and one set of one tag are printed and

 

cut (16 tags).

Note: The cut multiple does NOT effect the printed quantity.

2-6Setting Batch Options