4. Position a stack of fan-fold supplies so they feed easily into the front of the printer.

5. Feed the fan-fold supply into the supply slot under the supply door and between the supply guides on the core so that a few inches extend past the front of the printer. Center the supply across the platen roller.

6. Close the printer. See “Opening & Closing the Printer” for more information. Make sure the

 

printing side of the supply faces up after you close the printer.

7.

Turn on the printer if it is not already on.

8.

Press

under once or twice to advance the supply under the printhead. If you receive a

supply error, see Chapter 4, "Troubleshooting.”

Supply Slot

Loading Ribbon & Supplies 2-7