C o n n e c t i n g t h e C o m m u n i c a t i o n s C a b l e s

You can communicate serially (9-pin) or through USB (version 2.0).

For best results, use only Monarch® cables. See Appendix B, "Accessories" for part number information.

To connect serial cables:

1. Open the hinged cable door on the side of the printer by loosening the two screws with a Phillips screwdriver.

2. Plug the DB9 connector into the DB9 port.

3. Place the cable into one of the cable cavities.

4. Close the cable door and tighten the screws.

To connect USB cables:

1. Open the hinged cable door on the side of the printer by loosening the two screws with a Phillips screwdriver.

2. Plug the USB type A connector into the USB type A port or plug the USB mini-B connector into the mini USB port.

3. Place the cable around the top screw post and into one of the cable cavities as shown.

4. Close the cable door and tighten the screws.

U s i n g t h e D i s p l a y a n d B u t t o n s

USB mini-B cable shown

PTurns the printer on and off.

Four navigation buttons for selecting options on the display.

Display

 

On/Off

 

Navigation Buttons

Button

Navigation Buttons

1-4Operator’s Handbook