Specifications, Fiber Optic Modes

Specifications

A-Net I/O - MH10	10x EtherCon RJ45 connectors

A-Net I/O - MH10f	8x EtherCon RJ45 connectors; 2x SFP fiber
	optic ports (modules not supplied)
MH10f SFP Module	100 Mbps Fast Ethernet; Class 1 laser
	device
	SFP: use duplex LC connector

	Hot-pluggable

Fiber Optic Modes	Multi-Mode, up to 2km
	Single-Mode, up to 50km
Network Sample Rates	44.1/48kHz; 88.2/96kHz; 176.4/192kHz

Network Sample Rate	1x	44.1/48kHz,	39.7kHz to 52kHz
Range	2x	88.2/96kHz,		79.4kHz to 104kHz
	4x	176.4/192kHz,		158.8kHz to 208kHz
Network Bit Depth	24-bit, uncompressed

Network Latency	<420µs

Cable Length, Cat-5e	Maximum 400 feet (120 meters);
	Use Unshielded Twisted Pair (UTP) cable
Power Supply MH10	100-240VAC			50-60Hz, 15W

	Internal switching power supply;
	IEC connector, interchangeable; no DC
	backup power

Power Supply MH10f	100-240VAC			50-60Hz, 24W

	Internal switching power supply;
	IEC connector, interchangeable
MH10f Backup DC	24VDC, ±5%; 4-pin XLR, external supply
Power	Pin 1: Ground; Pin 4: 24VDC;
	Pin 2, 3: no connect

	Input Power Required: 24VDC ±5%, 0.8
	amp typical, 1.3 amp max.
	DC Jack: Neutrik NC4MAH

	DC Jack Mating Connector: Neutrik NC4FX
	or NC4FXX

Fuse	250V, F4AL

Dimensions	1U; 19”w x 8”d x 1.75”h
	482.6 x 203 x 45 mm
Weight	6 pounds;
	2.72 kg

All Aviom products are designed and manufactured in the USA.

Specifications27