Avocent 3050, 3100 Configuring network settings, To set the keyboard country code for Sun servers

26AutoView 3050/3100/3200 Switch Installer/User Guide

To set the keyboard country code for Sun servers:

1.If the OSCAR interface is not open, press Print Screen to open the Main dialog box.

2.Click Setup - Keyboard to open the Keyboard dialog box shown in Figure 3.9.

Figure 3.9: OSCAR Interface Keyboard Dialog Box

3.Select a country code and click OK to save your settings.

4.Reboot the Sun servers. After rebooting, each Sun server will request the country code setting stored in the IQ module.

NOTE: If you wish to reboot the target devices by power-cycling them, you must wait 90 seconds before rebooting. A soft reboot may be performed without waiting 90 seconds.

Configuring network settings

Use the Network dialog box to set the IP address, select an Ethernet mode or enable or disable the Ping Response feature.

NOTE: Only appliance administrators can make changes to Network dialog box settings. Other users can still access this dialog box, as well as the IP Setup dialog box, to view information, but they will not be able to make any changes.

To set the Ethernet Mode:

1.If the OSCAR interface is not open, press Print Screen to open the Main dialog box.

2.Click Setup - Network to open the Network dialog box shown in Figure 3.10.