30AutoView 3050/3100/3200 Switch Installer/User Guide
4.Repeat steps
5.Click OK in the Devices dialog box to save settings.
NOTE: Changes made in the Device Modify dialog box are not saved until you click OK in the dialog box.
Assigning target device names
Use the Names dialog box to identify target devices by name rather than by port number. The Names list is always sorted by port order. You can toggle between displaying the name or the EID number of each IQ module, so even if you move the target device to another port, the name and configuration will be recognized by the switch.
NOTE: When it is initially connected, a target device will not appear in the Names list until it is powered up. Once an initial connection has been made, it will appear in the Names list even when powered down.
To access the OSCAR interface Names dialog box:
1.If the OSCAR interface is not open, press Print Screen. The Main dialog box appears.
2.Click Setup - Names to open the Names dialog box shown in Figure 3.14.
Figure 3.14: OSCAR Interface Names Dialog Box
NOTE: If new IQ modules are discovered by the AutoView 3050/3100/3200 switch, the
To assign names to target devices:
1.In the Names dialog box, select a target device name or port number and click Modify to open the Name Modify dialog box shown in Figure 3.15.