48AXIS 233D - System Options
SNMP
The Simple Network Management Protocol (SNMP) allows remote management of network devices. Depending on the level of security required, select the version of SNMP to use. The three levels of security are:
•SNMP V1 - includes no security.
•SNMP V2c - uses very simple security. The community name can be specified as a pass- word for read or read/write access to all supported SNMP objects. The community is the group of network devices using SNMP.
•SNMP V3 - provides encryption and secure passwords. HTTPS must be enabled.
UPnP™
The camera includes support for UPnP™, which is enabled by default. If also enabled on your computer, the camera will automatically be detected and a new icon will be added to “My Network Places.”
Note: UPnP must also be enabled on your Windows XP or ME computer. To do this, open the Control Panel from
the Start Menu and select Add/Remove Programs. Select Add/Remove Windows Components and open the Networking Services section. Click Details and then select UPnP as the service to add.
RTP / MPEG-4
These settings are the port range, IP address, port number (video and audio), and
Bonjour
The AXIS 233D includes support for Bonjour. When enabled, the camera is automatically detected by operating systems and clients that support this.
Ports & devices
I/O Ports - The pinout, interface support and the control and monitoring functions are described in the section on the I/O terminal connector blocks, on page 54.
Maintenance
•Restart - The unit is restarted without changing any of the settings. Use this method if the unit is not behaving as expected.
•Restore - The unit is restarted and most current settings are reset to factory default val- ues. The settings that will not be reset are as follows:
•the boot protocol (DHCP or static)
•the static IP address
