12 | Setup for NetWare | AXIS 560/660 User’s Guide |
|
|
|
NetWare
Queue-based NetWare Printing (Pure IP)
Follow the instructions below to install the AXIS 560/660 in the NetWare Pure IP environment:
1.Start the Configuration Wizard from the User mode in the AXIS 560/660 Web interface.
2.Click your way through the Wizard until reaching the NetWare page. Make sure that the PSERVER_NDS parameter is set. If you want to change the parameter value or if the parameter value is empty, enter the desired values. The parameter value must include the tree or the preferred file server you want to login to and the print server name including the context.
3.Use NetWare Administrator to create the printer, print server and queue objects in the NDS tree.
4.Use the Add Printer Wizard to install the printer on your client. Note that only NDS queue based PSERVER printing is supported. When installing, choose Network Printer and browse to the queue you have just created. Alternatively, choose Local Printer and select the queue you have just captured.
Any configuration and management of the AXIS 560/660 can be performed from any standard Web browser. Please refer to Using any standard Web browser, on page 23.
Notes:
If the PSERVER_NDS parameter includes the name of a tree and not a specific file server, RCONAG6.NLM must be running on at least one file server in the specified tree.
If you have both IPX and IP enabled in your network, you can use AXIS NetPilot to install the AXIS 560/660 and to connect print queues. See
Pure IP requires that you run NetWare 5 or higher.
